Please use this identifier to cite or link to this item: http://hdl.handle.net/2381/1930
Title: Speed Control of a New Disc-type Ultrasonic Motor by Using Current Controller
Authors: Juang, P. A.
Gu, Da-Wei
First Published: 2006
Citation: IEEE Transactions on Power Electronics, 2006, 21 (1), pp.219-224
Abstract: The rotational speed of an ultrasonic motor is related to the vibration speed of its stator. Because drift of the piezostator characteristics will cause variation of the motor speed, a controller is thus necessary in order to produce a constant output speed. Variations of the motor output characteristics will also make it very difficult to obtain the efficiency of the motor. This paper points out the origins of possible drifts in a new disc-type piezoelectric ultrasonic motor which has three nonequal-triangular (120°-90°-150°) fixed points near the edge. The frequency behavior of the proposed motor and its consequences on speed control scheme are discussed. The speed control scheme is implemented by using current modulation, so the rotational speed will be kept constant.
DOI Link: 10.1109/TPEL.2005.861159
ISSN: 0885-8993
Links: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=1566708
http://hdl.handle.net/2381/1930
Type: Article
Appears in Collections:Published Articles, Dept. of Engineering

Files in This Item:
There are no files associated with this item.


Items in LRA are protected by copyright, with all rights reserved, unless otherwise indicated.