Please use this identifier to cite or link to this item: http://hdl.handle.net/2381/36253
Full metadata record
DC FieldValueLanguage
dc.contributor.authorGeddes, A.-
dc.contributor.authorBoesch, Hartmut-
dc.date.accessioned2016-01-11T13:08:34Z-
dc.date.available2016-01-11T13:08:34Z-
dc.date.issued2015-02-20-
dc.identifier.citationAtmospheric Measurement Techniques, 2015, 8 (2), pp. 859-874 (16)en
dc.identifier.issn1867-1381-
dc.identifier.urihttp://www.atmos-meas-tech.net/8/859/2015/amt-8-859-2015.htmlen
dc.identifier.urihttp://hdl.handle.net/2381/36253-
dc.description.abstractAerosols are an important factor in the Earth climatic system and they play a key role in air quality and public health. Observations of the oxygen A-band at 760 nm can provide information on the vertical distribution of aerosols from passive satellite sensors that can be of great interest for operational monitoring applications with high spatial coverage if the aerosol information is obtained with sufficient precision, accuracy and vertical resolution. To address this issue, retrieval simulations of the aerosol vertical profile retrieval from O[Subscript: 2] A-band observations by GOSAT, the upcoming Orbiting Carbon Observatory-2 (OCO-2) and Sentinel 5-P missions, and the proposed CarbonSat mission have been carried out. Precise retrievals of aerosol optical depth (AOD) within the boundary layer were found to favour low-resolution, high signal-to-noise instruments such as Sentinel-5 P, whereas higher-resolution instruments such as OCO-2 showed greater performance at higher altitudes and in information content above the boundary layer. Retrieval of the AOD in the 0–2 km range with precision appears difficult from all studied instruments and the retrieval errors typically exceed a value of 0.05 for AODs up to 0.3. Constraining the surface albedo is a promising and effective way of improving the retrieval of aerosol, but the accuracy of the required prior knowledge is very high. Due to the limited information content of the aerosol profile retrieval, the use of a parameterised aerosol distribution is assessed, and we show that the AOD and height of an aerosol layer can be retrieved well if the aerosol layer is uplifted to the free troposphere; however, errors are often large for aerosol layers in the boundary layer. Additional errors are introduced by incorrect assumptions on surface pressure and aerosol mixture, which can both bias retrieved AOD and height by up to 45%. In addition, assumptions of the boundary layer temperature are found to yield an additional error of up to 8%. We conclude that the aerosol profile retrievals from O[Subscript: 2] A-band using existing or upcoming satellite sensors will only provide limited information on aerosols in the boundary layer but such observations can be of great value for observing and mapping aerosol plumes in the free troposphere.en
dc.language.isoenen
dc.publisherCopernicus Gesellschaft Mbhen
dc.rightsCopyright © Author(s) 2015. This work is distributed under the Creative Commons Attribution 3.0 License ( http://creativecommons.org/licenses/by/3.0/ ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.en
dc.subjectScience & Technologyen
dc.subjectPhysical Sciencesen
dc.subjectMeteorology & Atmospheric Sciencesen
dc.subjectSPECTRAL-RESOLUTIONen
dc.subjectCLOUD ALTITUDEen
dc.subjectRETRIEVALen
dc.subjectSATELLITEen
dc.subjectSCATTERINGen
dc.subjectATMOSPHEREen
dc.subjectOCEANen
dc.subjectCO2en
dc.subjectPOLARIZATIONen
dc.subjectSENSITIVITYen
dc.titleTropospheric aerosol profile information from high-resolution oxygen A-band measurements from spaceen
dc.typeJournal Articleen
dc.identifier.doi10.5194/amt-8-859-2015-
dc.identifier.eissn1867-8548-
dc.description.statusPeer-revieweden
dc.description.versionPublisher Versionen
dc.type.subtypeArticle;Journal-
pubs.organisational-group/Organisationen
pubs.organisational-group/Organisation/COLLEGE OF SCIENCE AND ENGINEERINGen
pubs.organisational-group/Organisation/COLLEGE OF SCIENCE AND ENGINEERING/Department of Physics and Astronomyen
dc.dateaccepted2015-01-26-
Appears in Collections:Published Articles, Dept. of Physics and Astronomy

Files in This Item:
File Description SizeFormat 
amt-8-859-2015.pdfPublished (publisher PDF)6.39 MBAdobe PDFView/Open


Items in LRA are protected by copyright, with all rights reserved, unless otherwise indicated.