Please use this identifier to cite or link to this item: http://hdl.handle.net/2381/36928
Full metadata record
DC FieldValueLanguage
dc.contributor.authorHuang, Z.-
dc.contributor.authorRuiz, Harold Steven-
dc.contributor.authorZhai, Y.-
dc.contributor.authorGeng, J.-
dc.contributor.authorCoombs, T. A.-
dc.date.accessioned2016-03-01T13:01:49Z-
dc.date.available2016-03-01T13:01:49Z-
dc.date.issued2016-01-28-
dc.identifier.citationIEEE Transactions on Applied Superconductivity, 2016, 26 (4), pp. 5202105-5202105 (5)en
dc.identifier.issn1051-8223-
dc.identifier.urihttp://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=7394141en
dc.identifier.urihttp://hdl.handle.net/2381/36928-
dc.description.abstractHigh magnetic field can be trapped in a bulk type-II superconductor through different magnetization methods. In our fully high-temperature superconducting (HTS) synchronous motor, the pulsed field magnetization (PFM) method is adopted due to its reduced cost, feasibility, and adaptability on the assembling of our HTS motor system. The HTS rotor was designed with 75 YBCO HTS bulks mounted on the surface of the rotor to make two pairs of poles after the PFM. In this paper, we give a PFM circuit used to generate a pulsed magnetic field about 1.5 T at the center of the magnetizing coil lasting less than 1 s by discharging a capacitor bank. We also investigate the homogeneity of the pulsed magnetic field produced by the coils. The main strategy for magnetizing the superconducting rotor is designed and investigated, and the rotor field profile after the whole magnetization procedure is measured and discussed as well.en
dc.language.isoenen
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE), United Statesen
dc.rightsCopyright © 2016, IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. Deposited with reference to the publisher's copyright and archiving policy.en
dc.subjectHigh-temperature superconductorsen
dc.subjectMagnetic field measurementen
dc.subjectMagnetic fieldsen
dc.subjectMagnetic fluxen
dc.subjectMagnetizationen
dc.subjectRotorsen
dc.subjectSuperconducting magnetsen
dc.subjectHTS rotoren
dc.subjectHTS synchronous motoren
dc.subjectpulsed field magnetizationen
dc.titleStudy of the Pulsed Field Magnetization Strategy for the Superconducting Rotoren
dc.typeJournal Articleen
dc.identifier.doi10.1109/TASC.2016.2523059-
dc.identifier.eissn1558-2515-
dc.description.statusPeer-revieweden
dc.description.versionPost-printen
dc.type.subtypeArticle-
pubs.organisational-group/Organisationen
pubs.organisational-group/Organisation/COLLEGE OF SCIENCE AND ENGINEERINGen
pubs.organisational-group/Organisation/COLLEGE OF SCIENCE AND ENGINEERING/Department of Engineeringen
dc.dateaccepted2016-01-25-
Appears in Collections:Published Articles, Dept. of Engineering

Files in This Item:
File Description SizeFormat 
IEEE_pp52022105_IRIS.pdfPost-review (final submitted)503.47 kBAdobe PDFView/Open


Items in LRA are protected by copyright, with all rights reserved, unless otherwise indicated.