Please use this identifier to cite or link to this item:
|Title:||Electrodeposition of chromium using novel deep eutectic solvents|
|Authors:||Al-Barzinjy, Azeez Abdullah Azeez|
|Supervisors:||Abbott, Andrew P.|
Ryder, Karl S.
|Presented at:||University of Leicester|
|Abstract:||Chromium electrodeposition is important for the production of anti-wear and anti-corrosion coatings. It has been carried out for over 50 years in a multi-billion dollars industry using essentially the same technology based on chromic acid. The toxicity of the electrolyte makes the search for an alternative process an environmental imputative. In this study a variety of novel formulations of deep eutectic solvents are produced and tested to determine their efficacy for chromium deposition. The study concentrates on using urea as a complexing agent with a variety of trivalent chromium salts. In the first results chapter complexes of CrCl3·6H2O with urea are formed. It is shown that this system displays high conductivities, despite relatively high viscosities compared with the previously reported chromium based deep eutectic solvents. Thick, adherent, non-cracked black chromium could be deposited and produce relatively hard chromium coatings. EXAFS suggests that there are a variety of chromium species but they are probably cationic with a variety of oxygen donors as ligands. In the next section [Cr(en)3]3+ species was produced as the cationic species and this had a higher conductivity than any similar system previously described. Bright, adherent, hard chromium was obtained by electroreduction with constant speciation. A novel solvatochromic shift, that we are unaware of in the literature, demonstrates the charge transfer complex results in an unexpected colour change. In an endeavour the remove of Cl- from the formation chrome-alum (KCr(SO4)2·12H2O) was used as the metal salt. This produced unprecedented high conductivity for this type of medium with a low viscosity. It was proposed that unlike most ionic liquids mass transport is not limited by hole transport and instead it is proposed that these liquids function more like very concentrated electrolytes where ion paring becomes important. In the final result section a variety of additives are tested. Some are shown to have a significant effect on the morphology and hardness of the deposit. Ultimately bright metallic chromium films could be reproducibly produced with a hardness of 800±10 HV. This is the first process based on Cr(III) to be able to achieve these rigorous requirements and suggests the first real alternative to hexavalent chromium for hard chrome.|
|Rights:||Copyright © the author. All rights reserved.|
|Appears in Collections:||Theses, Dept. of Chemistry|
Items in LRA are protected by copyright, with all rights reserved, unless otherwise indicated.