Please use this identifier to cite or link to this item:
Title: Numerical investigation of mixed convection heat transfer of nanofluids in a lid-driven trapezoidal cavity
Authors: Kareem, Ali Khaleel
Mohammed, H. A.
Hussein, Ahmed Kadhim
Gao, Shian
First Published: 15-Aug-2016
Publisher: Elsevier
Citation: International Communications in Heat and Mass Transfer, 2016, 77, pp. 195–205
Abstract: Mixed convection heat transfer in a two-dimensional trapezoidal lid-driven enclosure filled with nanofluids heated from below is numerically studied. The governing equations for both fluid flow and heat transfer are solved by using the finite volume method (FVM). The bottom wall of the enclosure is heated while the upper wall is cooled at lower temperature and the other two sidewalls are adiabatic. Four types of nanofluids (Al₂O₃, CuO, SiO₂, and TiO₂ with pure water) with nanoparticle volume fraction (ϕ) in the range of 1–4% and nanoparticle diameter in the range of 25–70 nm were used. This investigation covers Richardson number and Reynolds number in the ranges of 0.1–10 and 100–1200, respectively. The trapezoidal lid-driven enclosure was studied for different rotational angles (Φ) in the range of 30°–60°, different inclination sidewalls angles (γ) in the range of 30°–60° and various aspect ratios (A) ranged from 0.5 to 2. This investigation is also examined the opposing and aiding flow conditions. The results show that all types of nanofluids have higher Nusselt number compared with pure water. It is found that SiO2–water has the highest Nusselt number followed by Al₂O₃–water, TiO₂–water, and CuO–water. The Nusselt number increases as the volume fraction increases but it decreases as the diameter of the nanoparticles of nanofluids increases. The Nusselt number increases with the decrease of rotational angle and inclination angle from 30° to 60° and with the increase of aspect ratio. The results of flow direction show that the aiding flow gives higher Nusselt number than the opposing flow.
DOI Link: 10.1016/j.icheatmasstransfer.2016.08.010
ISSN: 0735-1933
Embargo on file until: 15-Aug-2018
Version: Post-print
Status: Peer-reviewed
Type: Journal Article
Rights: Copyright © Elsevier, 2016. After an embargo period this version will be an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License (, which permits use and distribution in any medium, provided the original work is properly cited, the use is non-commercial and no modifications or adaptations are made.
Description: The file associated with this record is under a 24 month embargo from publication in accordance with the publisher's self-archiving policy. The full text may be available through the publisher links provided above.
Appears in Collections:Published Articles, Dept. of Engineering

Files in This Item:
File Description SizeFormat 
JCHMT paper.pdfPost-review (final submitted author manuscript)1.57 MBAdobe PDFView/Open

Items in LRA are protected by copyright, with all rights reserved, unless otherwise indicated.