Please use this identifier to cite or link to this item: http://hdl.handle.net/2381/44313
Title: Impedance spectroscopy characterization of neutron irradiated thermoelectric modules for space nuclear power
Authors: Mesalam, R
Williams, H
Ambrosi, R
Kramer, D
Barklay, C
Garcia-Canadas, J
Weston, D
First Published: 8-May-2019
Publisher: American Institute of Physics
Citation: AIP Advances, 2019, 9, 055006
Abstract: The European Space Agency is currently supporting the research and development of advanced radioisotope power systems utilising thermoelectric modules. The performance of thermoelectric modules following exposure to neutron radiation is of significant interest due to the likely application of radioisotope thermoelectric generators in deep space exploration or planetary landers requiring prolonged periods of operation. This study utilises impedance spectroscopy to characterise the effects of neutron irradiation on the performance of complete thermoelectric modules, as opposed to standalone material. For a 50 We americium-241 radioisotope thermoelectric generator design, it is estimated that the TE modules could be exposed to a total integrated flux of approximately 5 × 1013 neutrons cm-2 (>1 MeV). In this study, an equivalent neutron dose was simulated experimentally via an acute 2-hour exposure in a research pool reactor. Bi2Te3-based thermoelectric modules with different leg aspect ratios and microstructures were investigated. Gamma-ray spectroscopy was initially used to identify activated radionuclides and hence quantify irradiation induced transmutation doping. To evaluate the thermoelectric properties pre- and post-irradiation, impedance spectroscopy characterization was employed. Isochronal thermal annealing of defects imparted by the irradiation process, revealed that polycrystalline based modules required significantly higher temperature than those with a monolithic microstructure. Whilst this may indicate a greater susceptibility to neutron irradiation, all tested modules demonstrated sufficient radiation hardness for use within an americium-241 radioisotope thermoelectric generator. Furthermore, the work reported demonstrates that impedance spectroscopy is a highly capably diagnostic tool for characterising the in-service degradation of complete thermoelectric devices.
DOI Link: 10.1063/1.5095619
ISSN: 2158-3226
Links: https://aip.scitation.org/doi/10.1063/1.5095619
http://hdl.handle.net/2381/44313
Version: Publisher Version
Status: Peer-reviewed
Type: Journal Article
Rights: Copyright © the authors, 2019. This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Description: See supplementary material ftp://ftp.aip.org/epaps/aip_advances/E-AAIDBI-9-009905 for the gamma and impedance spectroscopy data required to reproduce these findings.
Appears in Collections:Published Articles, Dept. of Engineering

Files in This Item:
File Description SizeFormat 
1.5095619.pdfPublished (publisher PDF)5.05 MBAdobe PDFView/Open


Items in LRA are protected by copyright, with all rights reserved, unless otherwise indicated.