Please use this identifier to cite or link to this item:
|Title:||Cooling Slope Casting to Obtain Thixotropic Feedstock II: Observations with A356 Alloy|
|Authors:||Legoretta, E. Cardoso|
Atkinson, Helen V.
|Citation:||Journal of Materials Science, 2008, 43 (16), pp. 5456-5469|
|Abstract:||New Rheocasting (the NRC process) is a recently developed semisolid processing route. There are two versions of this route. In one, molten alloy is poured directly into a mould and through careful temperature control during cooling a spheroidal semisolid microstructure is achieved, before the material in the mould is upended into a shot sleeve and hence forced into a die. Alternatively, the molten alloy is poured onto a cooling slope and thence into a mould before processing. The aim of the work described in this paper, and its companion, was to develop understanding of the microstructural development during the initial stages of this process i.e. in the mould before processing and with the cooling slope/mould combination. In the previous paper, an analogue system based on aqueous ammonium chloride has been used to visualise what happens when an alloy is poured into a tilted mould with a chill wall, which acts to mimic the mould and the cooling slope in the NRC process. In this companion paper, the results for pouring A356 aluminium alloy directly into a mould, and also via a cooling slope into a mould, are presented.|
|Description:||This is the author’s final draft of the paper published as Journal of Materials Science, 2008, 43 (16), pp. 5456-5469. The final published version is available at www.springerlink.com, Doi: 10.1007/s10853-008-2829-1.|
|Appears in Collections:||Published Articles, Dept. of Engineering|
Files in This Item:
|JMatSci IIrevised3--6-08.pdf||9.7 MB||Adobe PDF||View/Open|
Items in LRA are protected by copyright, with all rights reserved, unless otherwise indicated.