Please use this identifier to cite or link to this item: http://hdl.handle.net/2381/8787
Title: Wettability of Aluminium-Magnesium Alloys on Silicon Carbide Substrates
Authors: Candan, Ercan
Atkinson, Helen V.
Turen, Yunus
Salaoru, Iulia
Candan, Sennur
First Published: 2011
Publisher: Wiley-Blackwell on behalf of the American Ceramic Society (ACerS)
Citation: Journal of the American Ceramic Society, 2011, (publication pending)
Abstract: Wettability between the liquid matrix and the reinforcement is important for the processing of Metal Matrix Composites (MMCs); the contact angle can be measured with the sessile drop method. However, for the wetting angle of liquid Al-Mg alloys on ceramics, it is difficult to obtain an accurate measurement because aluminium is easily oxidized and the rate of evaporation of Mg is high. Here an oxide stripping device is used to provide an aluminium alloy droplet with minimal oxide on the surface when the droplet makes initial contact with the substrate. Results are reported for contact angle () versus time for Al-2.1, 3.9, 9.1 and 14.2 wt.%Mg alloys with sintered SiC substrates. The samples were quenched from the test temperature. Magnesium is playing a key role in the adhesion, or otherwise, of the droplet to the substrate. Magnesium is probably migrating to the surface of the droplet and evaporating or forming a ‘crusty’ layer on the surface over time. When viewed from above, ‘halo’ regions, initially showing interference colours, develop on the substrate around the base of the droplets. These are probably associated with Mg (and Al) diffusing from the droplet across the surface of the substrate.
ISSN: 0002-7820
Links: http://onlinelibrary.wiley.com/journal/10.1111/(ISSN)1551-2916
http://hdl.handle.net/2381/8787
Type: Article
Description: This is the pre-peer reviewed version of the following article: Journal of the American Ceramic Society, 2011, (publication pending) , which will be published in final form at http://onlinelibrary.wiley.com/journal/10.1111/(ISSN)1551-2916. This entry will be updated when the article is published.
Appears in Collections:Published Articles, Dept. of Engineering

Files in This Item:
File Description SizeFormat 
ErcanpaperFeb2010.pdfArticle260.92 kBAdobe PDFView/Open
Ercan Figures.pdfFigures1.43 MBAdobe PDFView/Open


Items in LRA are protected by copyright, with all rights reserved, unless otherwise indicated.