Please use this identifier to cite or link to this item: http://hdl.handle.net/2381/9040
Title: Autoregressive Order Selection for Rotating Machinery
Authors: Thanagasundram, S.
Schlindwein, Fernando Soares
First Published: Sep-2006
Publisher: International Institute of Acoustics and Vibration (IIAV)
Citation: International Journal of Acoustics and Vibration, 2006, Vol. 11(3), pp.144-154.
Abstract: This paper provides a practical rule for determining the minimum model order for Autoregressive (AR) based spectrum analysis of data from rotating machinery. The use of parametric methods for spectral estimation, though having superior frequency resolution than Fast Fourier Transform (FFT) based methods, has remained less favoured mainly because of the difficulties in estimating the model order. The minimum model order pmin required is the ratio of the sampling rate and the rotating speed of the machine. This is the number of samples in one shaft revolution. Traditional model order selection criteria, Akaike Information Criterion (AIC), Finite Information Criterion (FPE), Minimum Description Length (MDL), Criterion Autoregressive Transfer-function (CAT), and Finite Information Criterion (FIC) are used to estimate the optimal order. These asymptotic criteria for model order estimation are functions of the prediction error and the optimal order of an AR model is chosen as the minimum of this function. Experimental results, using vibration data taken from a dry vacuum pump at different sampling rates and rotating speeds, show that at there is a pmin marked reduction in the prediction error. For low speed rotating machinery, the optimal order is pmin. As the speed of the rotating machine increases, there is some advantage in using twice or thrice pmin, to produce more accurate frequency estimates. The Box- Jenkins method of order determination using autocorrelation and partial autocorrelations plots are also used for justification of the selection of this minimal order.
ISSN: 1027-5851
Links: http://www.iiav.org/ijav/index.php?va=viewpage&vaid=176
http://hdl.handle.net/2381/9040
Type: Article
Description: This is the publisher's PDF of the paper published as International Journal of Acoustics and Vibration, 2006, Vol. 11(3), pp.144-154. It is reproduced here with the publisher's permission. The published article is also available from the IJAV journal website at: http://www.iiav.org/ijav/index.php?va=viewpage&vaid=176
Appears in Collections:Published Articles, Dept. of Engineering

Files in This Item:
File Description SizeFormat 
Autoregressive order selection for Rotating Machinery_IJAV_Thanagasundram_Schlindwein.pdf331.1 kBAdobe PDFView/Open


Items in LRA are protected by copyright, with all rights reserved, unless otherwise indicated.